Showing posts with label trattoria. Show all posts
Showing posts with label trattoria. Show all posts

Thursday, June 17, 2021

Making a paper flower pots and a jug kit

 

Making miniatures is getting more straining physically the last couple of years. And it lessened the fun I alway had. So recently I've bought some small kits at different webshops to get me back on track making miniatures and enjoying them :)
At 't Tafereeltje I've bought some flower boxes, a pizza cutter, a wooden pizza plate with handle and a kit to make nine flower pots and a jug from paper. All of which is for the Italian project.


I've make jugs and other things from paper before but never got the result I wanted so I was curious how this would turn out.
It was easy enough, the descriptions were clear and I like the effect of the paint with filler mixture.





The flower pots look very nice imo even though they are a bit smaller than I expected. But that will be a good mix with the flower pots and planters I already got. Plus need less flowers to fill them lol
I love how the jug turned out. I had choosen an olive acrylic paint and did - I think 3 or 4 layers before I gave it a gloss varnish coating.





Thursday, June 13, 2019

Long overdue update on the Italian project!

It's been months since I've shown you the progress on the Italian project. Even though I've met with the miniature club twice since February, and I've been working on it at home as well :')
So this is mainly a quick photo update, so I can move on to the next thing ;)

I finished the awning and then I could
finally put the front of the trattoria in place
(which wasn't as easy as it sounds ^^).

Next, the ballustrade got glued to
the mountain wall. Because of all
the tweaking on the front, it
didn't fit as well as when I made it.

So I filled the gap with a piece of card-
board that was left over from cutting the
door opening :)

I've made two table clothes and pinned the planter under the
window, just untill I've made flowers (a)

I've put together some bodyparts for
a waitress and got this wig from an-
other doll.

Started sewing the trousers.

Made an apron from the same fabric I used for
the awning. Then I made the bistro tables, so
now there's four bistro chairs on my to-do-list ;)

And of course a neat collar shirt :)

She's still a w.i.p. and need shoes, arms, a face
paint and a better fitting wig but I'm very happy
with the clothes! 



I've used this photo as a reference for the apron: click
This one for the bistro tables: click
For the shirt this tutorial by AkameruKawaii was very helpful: click






Tuesday, February 26, 2019

Crafting together (the Italian project) - February

Last month while crafting with Jolinda and Monique I'd made a planter for the Italian bistro, and when I got home I made this test model from paper for the awning.


So last week we  met again. Jolinda continued with the stone steps and Monique worked on her garden. For me it was time to figure out the awning for real :)
For the frame I got the inspiration from Miniature House, but I didn't want mine to be as neat as hers and there was no need for working blinds :)
I wanted something like this one below. Red and white striped fabric crossed my mind, especially since I want red and white checkered tablecloths, but in the end I choose a blackberry red fabric, which I intend to use for the waitress apron as well.


While at the craft club I cut the parts for the frame from Balsa (2,5 mm) but in hindside I should have just used card board, since I had to start at least four times over :') That was also why I didn't get much further that afternoon.
That evening at home I glued four skewers to the fabric with textile glue, a little wider than the test model indicated. One by one I attached the Balsa parts onto the skewers.


Then, when the glue had dried long enough, I put the four Balsa parts together with masking tape to see how it looked. At that point I didn't had a clue as to how I'd do the sides ;)


I like that the fabric isn't pulled tight on the frame. That's why I glued the skewers a bit wider in the beginning.


I put some masking tape on the overhanging fabric at the front and drew a scallop pattern. I cut them with sharp siccors and removed the tape.
The sides were just done with a bit of tweaking and adjusting, glueing it on the frame and cutting the exces :)


I liked the resulting sides of the awning.


I'd like to stain the Balsa frame, but then I have to replace to masting tape holding the parts together with something else.


I also want to put the name of the trattoria on the awning, but I need to figure out a way to do that first :')