How to make an Hogwarts steamer trunk part 3

 (for part 2: here)

The metal looking details for the trunk were the most time-consuming part of the process. Especially glueing them :') I started with Tacky glue but that didn't work well enough, so in the end I used Super glue.

I made them from aluminum small and large tea light cups. Could have just drawn and cut them but for the first parts I used brass embossing stencils I had.

I cut them, made same tiny holes at both ends by piercing them and glued them. Super glue was needed ;)

Four on the front, four on the back and on to the next parts.

I forgot to show before, but this is how I tried to make them look less shiny and new. First I sanded the aluminum, I added a bit of black nail polish and then dabbed it with a paper towel before it dried completely. If there's still too much black, you could use some sand paper as well.

For the corner parts I drew the shape with a pencil on the aluminum and cut it with sharp siccors. Repeated that multiple times before I had a shape that fitted the corned and looked half way decent (a)

After a cut the parts for the eight corners. A bit too much black so I sanded them a bit. 

I punctured then on all three corners (with the silver side up), and made the holes for the side of the trunk a little bigger.

I've forgotten to take photo's when I made the longer metal strips but the process is the same.

The only thing missing are the locks but for those I'll look in Rijswijk at the fair next month :)

All in all, I'm very happy with the way it turned out. And though I normally need a tutorial or something to get started and make my own version of something, it was once trying to work this out on my own with only the movie stills for inspiration.

I hope you like following the process and if you want to know something about that, don't hesitate to contact me, here or on my Facebook page :)

How to make an Hogwarts steamer trunk part 2

After part 1 it was time to start adding bits and pieces to the trunk.

First I cut the died fabric cord in four equal parts of approx.

20 cm. I glued two in the lines I drew in the middle and two 

on the outside so they cover the wood seams. Once that had

dried, I glued the ends on the front and cut the excess cord.

I made two equal paper templates for the handles,
glued them with Tacky glue to the back of a
scrap of thin leather.

After I cut them out carefully, I made some very small strips
for aluminum and folded it around one side of the leather.
I used part of a matt silver coloured paper fastener,
but you could also use an aluminum tea light cup.

Before I attached the handles to the trunk I coloured the back of
the handles. Just to hide the paper. And I also decided to give the
outside of the trunk a coat of matt varnish first.

I resized and printed the Hogwarts logo.

And added Draco's initials :)
Here's also a look at the handles.

The further I got, the more I felt that the
greenish cord wasn't what the trunk needed.
So I cut 5 mm strips of black leather but
they just looked to new and shiny.

So, I decided on this brown leather.
A bit snake-like, so that seemed appropriate
for a Slytherin ;)

 

I found a nice green paper with a classy pattern
and glued that with wood glue on the inside of
the trunk. From the brow leather I cut four
strips and glued two together twice. I added tiny
pieces of aluminum from a tealight cup on the ends.

So, almost done with the inside. In the next part
I'll show you how to add the metal details on the outside
and show you the finished trunk :)

How to make a Hogwarts steamer trunk

To avoid those pesky cottage doors, I continued making items for Draco's bedroom (a)
So I started with a replica of the steam trunks you can see in the Harry Potter movies. No tutorial or starter point other than the movie pictures.

   

And because I hadn't been able to find a tutorial anywhere, I figured I should make some extra photos while working and take more meassurements than usual, in case someone wants to make a trunk as well :)
Since it's a work in progress, I hope things will work out right the first time.

For the base I used 3 mm Balsa:

• 2 x (7,7 cm x 4,6 cm) for top and bottom
• 2 x (5,2 cm x 1,8 cm) for both under side panel
• 2 x (5,2 cm x 1 cm) for both top side panels
• 2 x (7,7 cm x 1,8 cm) for both under panels front and back
• 2 x (7,7 cm x 1 cm) for both top panels front and back

Glue the parts together like this.
The longer panels fit between the smaller ones.

Sand the edges and corners untill
they look all rounded like this.

I also sanded the two parts together so they'd fit better.

I cut two strips from 1,5 mm Balsa,
approx. 0,4 cm x 5 cm and cut two corners.

I sanded the edge a bit rounded and then
glued it to the top of the trunk, like this.

Be sure you can still close the trunk :)

Next, I drew two pencil lines all around
the trunk so you'll get three equal parts.

I took approx. 80 cm fabric cord, and because
it was a bit too white, I made a mixture
from oil paint and rubbed it onto the cord.

After I'd stained the trunk (walnut), I used that
same greenish oil paint, mixed it with same white
Gesso (I know, weird xD) and lightly dabbed some
on the corners and other spots on the trunk.

And this is the result so far.

I love the aged and worn look!

Tomorrow I'll continue with all the bits and pieces.

I hope you liked it. Please, contact me if you have questions!

Part 2

Het hemelbed / The fourposter bed - part 3

Remember the fourposter bed I made last year from some picture frames? I used it a few times to show a bedcover or my house elf, Juvie, but otherwise it was only collecting dustbunnies while I was crafting all kind of other items ;)

And then I saw Julie Warren's tutorial on bedding and I just wanted to do that. But not for the cottage beds since I'll obviously change my mind about colours and fabrics at least a dozen times before the bedroom will be even finished ;)
And then the fourposter bed crossed my mind. I had already bought some nice fabrics.

So pretty <3 Let's hope Draco loves it too ;)

I already had the white and beige fabric.
The beautiful damask looking fabric for the sheet
and bedcover are from Jan van den Doel and
the other fabrics are from Minidoor.

 The bed runner has two different sides.

Originally, I planned drapes around the bed ...

.. but I might just decide against them :)

edit: And just for the fun of it, a photo with my favourite couple (a)

A bed for Penny

When showing the non-sewing quilt I made I used Draco's four poster bed in the final photo, but that didn't feel right. So I put the quilt away for the time being because, of course, I wanted to make a bed for little Penny next :)
I decided to make the bed based on Julie Warren's tutorial (left), but with the head- and footboard I found in an other tutorial (right).

  

One tutorial was in cm, the other was in inches, so lots of adapting needed to be done, and then they both happened to be double beds, so I had to resize - and remeasure - everything to a smaller size as wel. Secretly I liked the measuring and drawing part though (a)

Can you tell I love masking tape? (a) I'd be lost without it, ghe ghe

I used tiny doorknobs, bought at Minidoor, to decorate the head- and footboard.

After I finished Penny's bed I couldn't find the quilt anywhere o.O I looked everywhere, untill finally I found it. Someone took it!!

Harry was just trying to sneak into the bed also, when I came and started making photo's (a)

 

After a lot of arguing - and the promise to make them a quilt too - I could place it on Penny's bed :)

I thought mother Bianca should get the same bed (with other bedding of course) because it might look weird having two different beds in one small room. It's not the same as with the different kitchen chairs, I think. I image (since they rented the cottage furnished) that there should be two single beds that could be shoved together for a couple :') Unless a previous tenant must have broken the bed and it had been replace by a different bed (a)

The first bed ended up becoming Bianca's bed, because lack of space in the attic room asked for a smaller second bed. Wish I could make it less long as well, but even old cottages probably have decent beds ;) Without the legs and boards there could be even more space but I decided against that.

After seeing the quilt on the four poster bed, I decided not to paint Penny's bed but stain it. I like the warm colours of wood for an attic room. This time I didn't use the oak stain like I did on the table and chair seats (the square in the middle) but used two different shades of brown shoe polish.

So on the right side is the smaller, lighter bed, which will be Penny's, and the left, regular single size bed with darker shade will be for Bianca.